User manual: PressoMassaggio
2. In the configuration with three applicators there are 2 splitters. They allow three
applicators to be used simultaneously such as 2 leg cuffs and the abdominal/buttocks belt.
In case 1. the "male" connection of the splitter must be connected to the machine and the
"female" twin one, to the two single connectors of the two applicators.
In case 2. the two splitters will be connected to each other. Specifically, the 1st splitter will
be connected to the machine as in case 1. While the "male" connection of the 2nd splitter
will be inserted in one of the two seats of the "female" connection of the 1st splitter. A single
connector must be connected to the second free seat of the "female" connection of the 1st
splitter. In each of the two seats of the "female" connection of the 2nd splitter the remaining
two single connectors will be connected.
CASE 1.
Connector
connections
Single
connector
CASE 2.
2° Splitter
Connector
connections
Single
connector
Plus
®
+
Splitter's „Male"
connection
Splitter
Splitter's „Female"
connection
connector
1° splitter's „Male"
connection
1° Splitter
1° splitter's „Male"
connection
2°splitter's „Male"
2° splitter's „Fema-
45
"Guide pin" on
"Male" connection
"Male"
connection
The „male" connection has „pins" and
Single
a „guide pin". For both, specific seats
correspond on the corresponding „fe-
male" connection. Therefore pay close
attention to the direction in which the
„male" and „female" connections are
connected together, since the „pins"
and „guide pin" must be inserted in the
corresponding seats.
Single
connector
Single
connector
connection
connection
le" connection
Single
connector
English
Seat of the
"Guide pin"
"Female"
"Pins" on "Male"
connection
connection
IMPORTANT: