Publicidad
Idiomas disponibles
Idiomas disponibles
O8
Usin 9 theHose endFlttochments
Cleaning a sofa, c ouchor stairsis a snapwithyourHalo
T M
Ultraviolet Vacuum.
Just release the hose from the base on the lower right of the product, open the
attachment hatch, gently squeeze the clip on the end of the hose and slide it into
the attachment hatch. Make sure that the grooves on the end of the hose match
the slots on the inside of the attachment hatch.
See Illustration 3 (right). Now your hose is
"live" with suction. Then you can simply press
either the crevice tool or upholstery brush onto
the end of the hose and use them to clean.
Ensure that the attachment hatch is firmly
closed after hose operation and use. The
brush bar and UV-C light cannot be operated
while the attachment hatch is open.
ILLUSTRATION 3
17
/
16
Hei9ht Fldjustment
We know that you may choose to use your Halo
TM
UV-ST Ultraviolet Vacuum
on a variety of surfaces within your home. Your Halo
TM
Ultraviolet Vacuum is
equipped with a height adjuster to make sure you are getting maximum cleaning
performance on any surface! To change the vacuuming height, simply turn the
height adjustment dial on the side of the bottom of the unit to the Low, Medium or
High position until the base of the Halo
TM
Ultraviolet Vacuum is raised or lowered
to the desired position, as Illustration 4 reveals.
If you hear a loud noise or sense that your Halo
TM
Ultraviolet Vacuum is having a
difficult time vacuuming on a particular surface, please quickly turn off the power
by pressing the ON/OFF button
before damage to the surface or
the product can occur.
ILLUSTRATION
4
Publicidad
