Publicidad
Idiomas disponibles
Idiomas disponibles
2610055543.qxp_GKT18V-20GC 5/26/20 4:37 PM Page 18
MITER GUIDE
The miter guide
used to precisely position a track from 60°
left to 45° right.
The miter guide must be positioned at the
front end of track.
A.
Loosen the knob
the miter guide (Fig. 11).
Follow instructions in "Connecting
B.
Multiple Tracks" to a
guide to the desired track using
connector
C.
Use the fence
angle. As the fence is moved, the
indicator
D.
Once the desired angle is set, tighten
the knob
guide to hold it at that angle (Fig. 13).
E.
Position the fence and connected track
such that the fence rests against the
workpiece.
F.
Once the miter guide and connected
track have been positioned as desired,
secure the miter guide and connected
track in place (refer to "Securing
Tracks").
ind Quality Products Online at:
Track Assembly
43
(sold separately) can be
48
on the bottom of
ttach the miter
41
.
47
to set the desired
46
shows the angle (Fig. 12).
48
on the bottom of the miter
GlobalTestSupply
www.
Fig. 11
Fig. 12
47
Fig. 13
18
.com
47
43
48
46
43
48
sales@GlobalTestSupply.com
Publicidad
