Publicidad
ASSEMBLY INSTRUCTIONS
Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue, Tape Measure
STEP 1
E
E
E
E
1.
Glue three Dowels (E) into top edge of both Sides (3 & 4). Glue two Dowels (E) into each
end of Sleepers (5 & 6 & 17).
STEP 2
6
B
5
3
B
2.
Glue Rear Sleeper (6) to Left Side (3) with pocket drilled hole to the back and fasten in place
with a 4x40mm Phillips Pan Head Screw (B). Glue the Upper and Lower Front Sleepers (5 &
17) to the Left Side (3). The pocket drilled holes in the upper front sleeper must face
up and the pocket drilled holes in the lower sleeper must face down. Secure both
Sleepers (5 & 17) with Screw (B).
TOOLS REQUIRED:
3
E
E
E
E
E
E
17
B
4
6
5
E E
E
E
E
x 18
E
E
E
E E
17
B
X03
598KFDW1 – Page 4
E
Publicidad
