Descargar Imprimir esta página

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Model #
833KFDH
Coronado Bench
Distressed Honey Finish
Assembly Instructions
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading the Assembly Instructions before you begin
your project.
For normal household use only.
recommended for commercial use.
Do not climb or stand in or on this piece
of furniture.
P.O. Box 2827
Eugene, OR 97402 USA
Service Policy:
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours:
Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order:
Provide the complete furniture
model number (upper left corner of this
page), part letter/number, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Outside U.S. or Canada: 541-687-0213
Fax: 541-687-2060 • www.whittierwood.com
Fax: 541-687-2060 • www.whittierwood.com
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Store the parts: 1) in their box; 2) in a dry place;
3) in temperatures ranging from 40° to 90°.
(Not on a cold, possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Production Code:
VN
We will replace any
05/08

Publicidad

loading

Resumen de contenidos para Whittier Wood Furniture Coronado 833KFDH

  • Página 1 Model # 833KFDH Coronado Bench Distressed Honey Finish Service Policy: We will replace any parts which are defective, missing or Assembly Instructions damaged during assembly. Please contact Whittier Wood Products customer service department directly (by phone, fax, mail or email) for replacement parts. Hours: Our friendly customer service staff can be reached Monday-Friday 7:00 a.m.
  • Página 2 — Parts List 833KFDH Coronado Bench BEFORE BEGINNING ASSEMBLY, check that the quantities of the parts received match those on the parts list. Ac - Left Leg Assembly - Qty. 1 Ic - Right Leg Assembly - Qty. 1 Bc - Seat Assembly - Qty. 1 Dc - Back Panel - Qty.
  • Página 3 833KFDH ASSEMBLY INSTRUCTIONS TOOLS REQUIRED: Phillips Screwdriver, Mallet or Padded Hammer, Wood Glue STEP 1 Spread a thin layer of glue in the dowel holes in the Seat Assembly (Bc).Insert the Back Panel (Dc) dowels into the holes in Seat Assembly (Bc). Fasten in place with four #3 x 35mm Pan Head Screws (K).
  • Página 4 STEP 3 Spread a thin film of glue in the dowel holes in the Left Leg Assembly (Ac). Attach the Upper Back (Cc) and Seat Assembly (Bc) to Left Leg Assembly (Ac) with 5 #6x70mm Hex Screws (Lc). Slide Box Bottom (Fc) in Front and Back Panels (Dc & Ec). View from bottom Spread a thin film of glue in the dowel holes in the Right Leg Assembly (Ic).
  • Página 5 Open the Seat. Attach the Lid Support (N) by placing four #3x15mm Flat Head Screws STEP 5 (J) in the holes in the Back Panel and Seat. NOTE: The long arm of the Lid Support (N) must be attached to the Seat. STEP 6 Glue Wood Buttons (Mc) in the exposed screw holes in the Leg Assemblies (Ac &...
  • Página 6 Modelo # 833KFDH Banco Coronado Acbaco do Pino Antiguo de Color Normas para obtener servicio: Reemplaza- Amarillo Claro remos las piezas que tengan defectos, falten o se dañen durante el armado. Sírvase comunicarse con el departamento de servicio al cliente de Whittier Instrucciones para Armar Wood Products directamente (por teléfono, fax, correo o e-mail) para obtener piezas de repuesto.
  • Página 7 833KFDH Banco Coronado LISTA DE PIEZAS Antes de comenzar a armar, verifi que que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Cant. Cant. Cant. Pata Izquierda ensamblada ..Fondo de la Caja ......Tornillo Hexagonal 6x70mm ...
  • Página 8 No. de modèle 833KFDH Banc Coronado Politique de service : Finition Miel en Pin Nous remplacerons toutes les pièces défectueuses, manquantes ou d’aspect Vieilli endommagées pendant le montage. Veuillez con- tacter directement le service clientèle de Whittier Instructions de Montage Wood Products (par téléphone, fax, courrier ou e-mail) pour obtenir les pièces de remplacement.
  • Página 9 833KFDH Banc Coronado NOMENCLATURE DES PIÈCES Antes de comenzar a armar, verifi que que haya recibido todas las piezas que se listan en la lista de piezas que se presenta a continuación. Qté. Cant. Cant. Pied de l’assemblage de gauche .. Fond de la caisse ......
  • Página 10 Gluing Hints These are general hints. Refer to the instruction sheet for detailed information on gluing your specific product. Your unit may not need glue. 1. We strongly recommend that you first lay out all the parts and familiarize yourself with how they fit together before assembling with glue.