Publicidad
Idiomas disponibles
Idiomas disponibles
Battery Replacement: Use CR2032 X 2 or equivalent.
Operating Your Two Way Remote Control:
Press and release the Trunk/Key + Option buttons of your remote simultaneously to toggle the
back lighting control on for 5 seconds.
Press the Trunk/Key + Option buttons of your remote control simultaneously until 2 beeps are
heard to access the features of your remote control.
Clock setting hours will be flashing, use the trunk/key button to increase, and the option
button to decrease. Use the lock button to save and move to the minutes setting, use the trunk
key button to increase and the option button to decrease. Use the lock button to save and
move to the next function.
Alarm Clock, Alarm Clock hours will be flashing, use the trunk/key button to increase, and
the option button to decrease. Use the lock button to save and move to the Alarm Clock
minutes setting, use the trunk key button to increase and the option button to decrease. Use
the lock button to save and move to the Alarm Clock On/Off Setting use the Trunk/Key to turn
on and the Option button to turn off, use the lock button to save and move to the next function.
Count Down Timer, Count Down Time hours will be flashing, use the trunk/key button to
increase, and the option button to decrease. Use the lock button to save and move to the
Count Down Timer minutes setting, use the trunk key button to increase and the option button
to decrease. Use the lock button to save and move to the Count Down Timer On/Off Setting.
Use the Trunk/Key to turn on and the Option button to turn off, use the lock button to save.
Press and Hold Trunk/Key + Option Buttons or allow 5 seconds of inactivity to exit feature
setting mode.
Additional Remote Control Settings:
Battery Save Mode: Press Trunk/Key + Option until 3 beep tones are heard = Battery Save
Mode. The unit will remain in the battery save mode, indicated by the battery icon flashing,
until any button is pressed.
Button Lock Mode: Press the Trunk/Key + Option Buttons simultaneously until 1 beep tone
is heard then press the Lock button = Button Lock Mode, repeat to unlock the buttons.
Melody, Vibrate, Melody w/Vibrate Selection: Press the Trunk/Key + Option Buttons
simultaneously until 1 beep tone is heard then press the Unlock button = Melody, a second
time = Vibrate, a third = Melody w/Vibrate.
Pre-set 10 Minute Count Down Timer: Press the Trunk/Key + Option Buttons simulta-
neously until 1 beep tone is heard then press the Trunl/Key Button starts the 10 minute count
down timer. Once the timer has expired, the unit will sound a melody.
Turn Off Transmitter's Button Beep Tones: Press the Trunk/Key + Option Buttons
simultaneously until 1 beep tone is heard then press the Option button toggles the transmitters
button beep tones on and off.
2nd Car Operation: Press the Trunk/Key + Option Buttons simultaneously until 1 beep tone
is heard then press the Lock + Unlock buttons simultaneously toggles on and off the 2nd car
mode. When in the second car mode, you can program the transmitter to a second vehicle
which may have a similar Panther Alarm system installed allowing full functional control of
both vehicles.
Page 7
128-9109
7 of 16
Publicidad
