Publicidad
M x 2
5)
With the towers standing upright, attach the Shelf Support (I) between the towers using a #8x1⅝"
Black Screw (M) through the predrilled holes in the Left and Right Vertical Dividers (Ba & Ca) . Pro-
filed edge of support must face down. See FIGURE 5.
L x 4
K
L
A
6)
Slide the Top (H) over the tower assembly so that the Cam Connectors (K) go into the holes in top
edge of Left and Right Side Panels (A & D).
Insert Cam Housings (L) into the holes in side panels and tighten. See FIGURE 6.
M
Ba
FIG. 5
H
I
M
Ca
L
K
D
FIG. 6
637Wa (Rev. 8/07) – PAGE 5
Publicidad
