Publicidad
Idiomas disponibles
Idiomas disponibles
100Wa Step Stool — Parts List
check that the quantities of the parts received match those on parts list below.
PART DESCRIPTION
Aa
Left Side . . . . . . . . . . . . . . . .
Ba
Right Side
ASSEMBLY INSTRUCTIONS
We recommend finishing the unit before final assembly.
1.
Lay out the wood parts in their approximate locations to become familiar with how they will go
together. See FIGURE 1.
Ca
Aa
Ca
FIG. 2
2.
Glue the Stretchers (Ca ) to the Left Side
(Aa). The two stretchers that go right under
the steps must not protrude above the edge
of the side and will have their rounded edge
facing down. The single stretcher in back will
have the rounded edge facing up. See
FIGURE 2. Glue the Right Side (Ba) to the
stretchers.
Page 2 – 100Wa (Rev. 9/07)
TOOLS REQUIRED:
Wood Glue, Rubber Mallet or Padded Hammer.
BEFORE BEGINNING ASSEMBLY,
QTY.
. . . . . . . . . . . . . . .
IMPORTANT:
Before finishing, read enclosed finishing hints.
D
Ca
Aa
FIG. 1
ROUNDED
EDGE DOWN
ROUNDED
Ca
EDGE UP
ROUNDED
EDGE DOWN
PART DESCRIPTION
1
Ca
Stretcher
1
D
Step
D
Ca
D
3.
Glue the Steps (D) to the top edge of the
sides. See FIGURE 3.
. . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . .
Ba
QTY.
3
2
D
FIG. 3
Publicidad
