Samsung 7 Serie Guía De Configuración Rápida página 5

Hug & Play
When the TV is initially powered on, basic settings proceed automatically and
subsequently.
Preset: Connecting the mains and antenna.
_| _ _ ONIOFF I|
, essthe,,owo° tto o the o oteoo t o LI
You can also use the POWER Cb button on the TV. i
The message Select Language of the OSD, is displayed. I ___
2, Press the ENTERIZ;_ button. Press the A or T button to select the language, then _ ...................
press the ENTERI_--;# button. The message Select 'Home Use' when installing this
TV in your home. is displayed.
3, Press the _l or !_ button to select Store Dome or Home Use, then press the
ENTERIB,,Jbutton. The message Select the Antenna source to memorize, is
displayed.
We recommend setting the TV to Home Use mode for the best picture in your
home environment.
Stere Dome mode is only intended for use in retail environments.
If the unit is accidentally set to Store Dome mode and you want to return to
Home Use (Standard): Press the volume button on the TV. When the volume
OSD is displayed, press and hold the MENU button on the TV for 5 seconds.
4, Press the A or _r button to memorize the channels of the selected connection. Press the ENTER C_ button to select Start.
Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
(_ In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the A, T, 4 or _- button,
then press the ENTER IZ;_ button. If you have Digital cable, select the cable system signal source for both Analog and
Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
& Press the ENTERI[B_ button to select Start. The TV will begin memorizing all of the available channels.
To stop the search before it has finished, press the ENTERI_--;# button with Stop selected.
After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then reappears.
Press the ENTER C_ button when channel memorization is complete. The message Set the Clock Mode, is displayed.
6, Press the ENTER El# button. Press the A or _r button to select Auto, then Press the ENTER El# button. The message Set to
daylight saving time. is displayed. If you select Manual, Set current date and time, is displayed.
7, Press the A or T button to select Off, On or Auto, then press the ENTERIZ;# button.
8, Press the A or T button to highlight the time zone for your local area. Press the ENTERI[B_ button. If you have received a
digital signal, the time will be set automatically. If not, refer to the 'Setting the Time' instructions to set the clock.
9, The description for the connection method providing the best HD screen quality is displayed. Check the description and press
the ENTERI_--;_ button.
10, Press the _1or _- button to select See Product Guide or Watch TV. Press the ENTERI_--;_ button.
• See Product Guide: You are moved to the Product Guide where you can view the introduction to the main functions of
your new HDTV.
• Watch TV: You can watch the memorized channels.
[3 If you want to reset this feature...
1, Press the MENU button to display the menu. Press the A or _' button to select Setup, then press the ENTER _ button.
3, Press the ENTERIZ;_ button again to select Plug & Play.
The Plug & Play feature is only available in the TV mode.