Publicidad
Idiomas disponibles
Idiomas disponibles
SMART ROUND THERMOSTAT COVER PLATE
Mount Wall Cover to a Horizontal 2 in. x 4 in. Electrical Box (See Fig 4)
1. Position the bracket on the electrical box with the arrow pointing up. Insert two #6-32 X 5/8" flat head
screws. Level the bracket and tighten the flat head screws.
2. Position the wall plate on the wall cover using the 4 mounting posts and snap them together.
3. Pull the wires through the wire hole on the wall cover / wall plate assembly. Position the assembly on the
bracket.
4. Insert two #6-32 X 3/8" pan head screws. Check leveling, if desired, and tighten the pan head screws.
Fig. 4. Mount bracket, wall cover, wall plate and thermostat to a horizontal 2 in. x 4 in. electrical box.
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-468-1502
www.resideo.com
33-00069EFS—04 M.S. Rev. 06-22 | Printed in United States
© 2022 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.
Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l'autorisation d'Honeywell International, Inc.
Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées.
Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc. Este producto es fabricado por Resideo
Technologies, Inc. y sus afiliados.
ELECTRICAL
BRACKET
BOX
#6-32 X 5/8 FLAT
HEAD SCREWS (2)
WIRE
WALL
COVER
MOUNTING HOLES (2)
WIRE HOLE
L
K
C
G
AUX
W
Y
2
a
O/B
W
Y
Universal
U
R
1
Hum
Dehum
U
R
2
C
Vent
1 Wire
2 Wire
MOUNTING POSTS (4)
WALL PLATE
MOUNTING HOLES (2)
WIRE HOLE
#6-32 X 3/8" PAN
HEAD SCREWS (2)
THERMOSTAT
M35409
Publicidad
