Descargar Imprimir esta página

THOMSON Cycloflex THVC2315FLEX Manual De Usuario página 34

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

1. Open the receptacle by pulling the tab on the lid
2. Turn the filter to the position of unlocking, then remove it.
3. Clean the filter with a brush, if necessary, clean it under running water
and then dry it.
4. reinstall the filter in its place and turn it to lock it.
Advice: The above steps are recommended after each emptying of the
dust cup.
ATTENTION
1. To avoid injury, handle the device with care.
2. Make sure each item is completely dry before next use.
3. Do not rub the filter or apply excessive force.
4. Make sure the filter is properly attached during assembly.
5. Change the filter if it is damaged or if the cleaning does not return to
the initial state.
Brush cleaning motorized
Please clean the brush when hair is tangled in the brush roller or wheel.
1. Dismantle the electric brush
EN-13

Publicidad

loading