LD Systems LDTR206 Manual De Usuario página 9

FEATURES
TR 206
• 2 loudspeaker circuits
• 60 W power handling per channel
• Inputs from 8, 4 or 2 Ohm amplifier signals
• Outputs 100 V, 70 V or 25 V line output to loudspeaker circuits
• All-in-one design combining the transformer and protective chassis
• Compact and easy to mount and connect
TR 212
• 2 loudspeaker circuits
• 120 W power handling per channel
• Inputs from 8, 4 or 2 Ohm amplifier signals
• Outputs 100 V, 70 V or 25 V line output to loudspeaker circuits
• All-in-one design combining the transformer and protective chassis
• Compact and easy to mount and connect
CONNECTIONS, OPERATING AND DISPLAY ELEMENTS
3
The LD TR 206 and LD TR 212 models have identical connections
INPUT 1 + 2
1
Amplifier inputs for amplifiers with low impedance speaker outputs.
Terminal blocks are supplied with the device (for pin assignment, see TERMINAL STRIP CONNECTIONS).
Maximum load capacity
TR 206: 2 x 60 Watt
TR 212: 2 x 120 Watt
OUTPUT 1 + 2
2
Speaker outputs for 100, 70 and 25 volt installation speakers.
Terminal strips are supplied with the device (for pin assignment, see TERMINAL STRIP CONNECTIONS).
STRAIN RELIEF
3
Use the strain relief to protect the terminal strip connections and the terminal blocks from
damage and to prevent the terminal blocks from being pulled out unintentionally.
ATTENTION: When using Class D power amplifiers, make sure that the connection of
an external transformer cannot damage the power amplifier! If in doubt, contact the
manufacturer of the power amplifier.
2 1
9