Publicidad
Idiomas disponibles
Idiomas disponibles
EISNHAUER
DESKS + ACCESSORIES
A
B
PLEASE NOTE: The illustrations may differ slightly from the actual design. If the accessories are incomplete, please contact customer service
on +49 (0) 9364 81 577-0 or info@eisnhauer.de (weekdays 8.00-17.00).
Daimlerstr. 25, 97267 Himmelstadt, Germany • Phone +49 (0) 9364 81 577-0 • E-Mail info@eisnhauer.de • Web www.eisnhauer.de
®
BEWARE: Use the enclosed screws for table tops with a
minimum thickness of 20 mm only!
Installation
apply and press on 12 sticky pads (1) as shown
(optional) mark the drill holes of the socket
fix socket
insert vertical rail
mount rail
2 fixing screws (3)
insert horizontal rail
place the PC case in the middle of the base of rail
slide rail
pressure
EISNHAUER
®
is a trademark of Ergobasis GmbH
CPU-HOLDER CLAW
Bedienungsanleitung im PDF-Format
Manual in English as PDF format
Manuel d'instruction français en PDF
Manual de instrucciones en español como PDF
Manuale d'istruzioni italiano come PDF
WEB: manual-claw.eisnhauer.de
C
1
A
firmly to the table top with the 6 screws (2)
B
from below and hook it into the grid
B
from the rear at the holes provided using the
C
sideways
C
onto the PC case and fix it in place with a little
2
3
A
and pre-drill
B
Publicidad
