the risk of tripping. Please ensure that the
product is fully inflated before children enter
the playground. Using this product when
inflated or excessively deflated may cause
product instability and may cause serious
injury. Since the product is kept inflated by a
constant air flow, air leakage from the joint is
normal and necessary, so the product will not
over-expand.
Maintenance Instruction
Wrong
The product shall be accompanied by maintenance instructions
that draw attention to the need for regular inspection and
maintenance of major components (beams, hangers, anchors,
etc.) and that if these inspections are not carried out, the product
may tip over or otherwise become a hazard. Sometimes
maintenance instructions should also include the following
recommendations, noting that it is especially important to follow
these recommendations at the beginning of each season and at
regular intervals during the season of use:
Outdoor products are easy to wear and require proper
maintenance. When the fabric is found to be invalid, fragile or
12
Right
damaged, it must be repaired in time, and the provided patch can
be used to repair it. To repair, deflate thoroughly and make sure
that the surface is dry. Cut the patch to fit the patch. Apply glue on
both the repair patch and the damaged surface, let the glue dry
for 30 seconds, and then stick the patch on the surface. Allow to
dry at least 4 hours before using. Store the product and blower in
a dry environment when not in use.
To prevent overturning or other hazards, the product and all its
anchorage points should be inspected regularly before and during
use, and re-fixed appropriately to ensure that they remain safely
on the ground during outdoor use.
To prevent overturning or other hazards, the product should be
checked regularly for potential unsafe conditions, especially the
beginning of each season and regular intervals during the
seasons, such as damage to the power cord, plug, casing or
parts. If such damage is found, the product should not be used
until it is properly repaired.
Disassembly Instructions
1. Make sure that after all children leave the product, turn off the
blower (air pump), remove the inflation tube, unplug the power
cord of the blower (air pump), remove the ground pile, and store
the blower (air pump) in a dry place for future use. When the
product is not in use, do not put the product and the blower (air
pump) in the rain.
2. After discharging the air completely, fold the product for
storage.
13