Publicidad
Idiomas disponibles
Idiomas disponibles
Specified Conditions Of Use
Applied directives
The Weller Zero Smog volume
fume extraction system
extraction unit corresponds to
the EC Declaration of
Conformity in accordance with
the basic safety requirements
of Directives 2004/108/EC,
2006/95/EC and 2011/65/EU
(RoHS).
The manufacturer will not be
liable for unauthorised modifica-
tions to the device.
The filtration system may only be
put into operation if it is in perfect
working order.
User groups
Due to differing degrees of risk and potential hazards, several work steps may only be performed by trained
experts.
Work step
Installation of complex pipe systems with multiple
extractor arms connected
Replacing electrical replacement parts
Specification of maintenance intervals
Operation
Filter change
Installation of complex pipe systems with multiple
extractor arms connected
Replacing electrical replacement parts
The solder fume extraction unit is a mobile filter unit for the separa-
tion of particulates and gases. The unit is used for the filtration of
exhaust air during soldering, gluing, cleaning, pressure processes
etc., and is suitable for continuous duty in industrial environments.
Warning! Danger of asphyxiation, Danger of poiso-
ning
Improper use may result in respiratory problems, asphy-
xiation, poisoning or cancer
Particles and gases which are unsuitable for the filter
„
medium in use may not be extracted.
Liquids and flammable gases may not be extracted
„
Never use the device without a filter or with a full filter.
„
Never use the device without the fan cover
„
The unit is designed for use as a surface extraction unit and is not
suitable for extracting fumes directly from the soldering gun.
This device may only be used at room temperature and indoors. The
unit must not be exposed to temperatures above 50°C, naked flame or
condensed solvents.
Intended use of the soldering station/ desoldering station also inclu-
des the requirement that you
adhere to these instructions,
„
observe all other accompanying documents,
„
„
comply with national accident prevention guidelines applicable at the
place of use.
User groups
Specialist personnel with technical training
Electricians
Safety expert
Non-specialists
Technical trainees under the guidance and supervision
of a trained expert
17
Publicidad
