Descargar Imprimir esta página

Panasonic ES4001 Instrucciones De Funcionamiento página 6

Ocultar thumbs Ver también para ES4001:

Publicidad

Idiomas disponibles

Idiomas disponibles

Before use
This Wet/Dry shaver can be used for
wet shaving with shaving lather or for
dry shaving. You can use this water¬
tight shaver in the shower and clean
it in water. Treat yourself to wet lather
shaves for at least three weeks and
notice the difference. Your Panasonic
Wet / Dry shaver requires a little time
to get used to because your skin and
beard need about a month to adjust
to any new shaving method.
Charge the shaver for at least 12
hours before using it for the first time
or when it has not been in use for
more than six months.
Parts Identification
(see fig. 1)
® Protective cap
@ Outer foil
© Outer foil release buttons
® Foil frame
© Inner blades
© Foil frame release button
© On/Off switch
(0) Switch lock button
© Charge indicator lamp
© Trimmer
® Trimmer switch
© Charging adaptor with auto¬
matic voltage adjustment
(0) Wall mount
(n) Wood screws
© Travel pouch
How to use the wall mount
DANGER - To reduce risk of death
by electric shock, do not install where
the unit can fall into a tub or sink.
The charging adaptor can be hung
on the wall using wood screws (in¬
cluded).
1. Select an appropriate location on
the wall where the screws can go
in.
2. Attach the wall mount to the wall,
as shown, with the wood screws,
making sure that the arrow points
up.
3. Slide the charging adaptor
grooves into the wall mount until
it clicks in.
To remove the charging adaptor from
the wall mount, slide the adaptor up¬
ward.
Charging
(see fig. 2)
Place the charging adaptor upright
on a flat surface or mount it on a wall.
Plug the adaptor into an AC outlet.
It will adjust automatically to voltages
between 100-120 and 220-240V AC.
In some areas, a special plug adap¬
tor may be required.
Switch the shaver to the " 0 • charge
position " and place it upright into the
charging adaptor with the switch fac¬
ing toward the front.
The charge indicator lamp will glow
red and it will stay on until the shaver
is removed from the adaptor.
You can fully charge the shaver in 8
hours if it seems to be losing speed.
A full charge will supply enough
power for about 7 shaves (three min-
6

Publicidad

loading