Publicidad
Idiomas disponibles
Idiomas disponibles
TROUBLESHOOTING
CHART:
See appropriate
section in manual unless directed to Sears service center
PROBLEM
Engine
overheats
Excessive
bounce/difficult
dling
CAUSE
Engine runs but
tiller won't move
1. Low oil level/dirty oil.
2. Dirty engine air screen.
3. Dirty engine.
4. Partially plugged muffler.
5. Improper carburetor
adjustment.
1. Ground too dry and hard.
2. Wheels and depth stake
incorrectly adjusted.
CORRECTION
1. Check oil level/change oil.
2. Clean engine air screen.
3. Clean cylinder fins,
airscreen, muffler area.
4. Remove and clean muffler.
5. Adjust carburetor to richer
position.
1. Moisten ground or wait
for more favorable soil ban-
conditions.
2. Adjust wheels and depth
stake.
Soil balls up or
1. Ground too wet.
1. Wait for more favorable
clumps
soil conditions.
1. Engage tine control.
1. Tine control is not
engaged.
2. V-belt not correctly
adjusted.
3. V-belt is off pulley(s).
Engine runs but
labors when
tilling
1. Tilling too deep.
2. Throttle control not
properly adjusted.
3. Carburetor out of
adjustment.
2. Inspect/adjust
V-belt.
3. Inspect V-belt.
1. Set depth stake for shal-
lower tilling.
2. Check throttle control setting.
3. Make necessary adjust-
ments.
D.0.E
!
i
° Find this and a[[ your other product manuaB online.
° Get answersfrom our team of home experts.
oGetperson tized
maintenanco
plan f or y ou home.
° Find information and tools to help with home projects.
manage
home
bro_gatto youbySears
18
Publicidad
