Descargar Imprimir esta página

Metabo BS 12 SP Instrucciones De Manejo página 11

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 25
Clamping bit
Open the rapid-action keyless chuck and insert
the bit fully.
Twist the sleeve (9) towards "GRIP, ZU", until
the bit is clamped tightly in the chuck.
When using soft bit shanks, it may be neces-
sary to retighten the chuck after a short period
of operation.
Removing the chuck
10
11
Open the rapid-action keyless chuck.
a Loosen the screw (10)
(NB: left-hand thread).
b Screw off the chuck (1) using an open
ended spanner (11).
Replace the chuck by reversing the above
procedure.
Cleaning
Clean from time to time by holding the tool with
the rapid-action keyless chuck facing vertically
downwards and twist the sleeve as far as it will
go towards "GRIP, ZU", and then turn back
fully in the opposite direction ("AUF,
RELEASE").
The dust which has accumulated will fall out of
the chuck.
7 Hints and Tips
Drilling
Use of 2nd gear is recommended (higher
speed).
Driving screws
Use of 1st gear is recommended (low speed),
and with the torque control feature in opera-
tion.
1
Tapping threads
Apply a light film of oil to the tap.
Select 1st gear (low speed).
Switch on torque control.
8 Accessories
Use original Metabo accessories only.
To assist in selecting the correct accessories,
make sure that you take a note of the exact
model of your tool for your dealer.
A Charger
B Holster
C Battery packs of varying capacities.
Buy only battery packs of the correct
voltage for your cordless tool.
For complete range of accessories, see
www.metabo.com or the main catalogue.
9 Repairs
Repairs to power tools must be
carried out by a qualified electrician
only.
Any Metabo power tool in need of repair can be
sent to one of the addresses listed in the spare
parts list.
Please attach a description of the fault to the
tool.
10 Environmental Protection
Metabo packaging is 100% suitable for recyc-
ling.
Power tools and accessories at the end of their
service life still contain large amounts of
valuable raw materials and plastics which can
likewise be fed back into a recycling process.
These Operating Instructions are printed on
paper produced in a chlorine-free bleaching
process.
Battery packs must not be disposed of along
with domestic waste.
Return any faulty or exhausted battery packs to
your Metabo dealer.
Do not throw battery packs away in water.
Only for EU countries: Do not dispose of
electric tools together with household
waste material! In observance of European
Directive 2002/96/EC on waste electrical and
electronic equipment and its implementation in
ENGLISH
ENG
11

Publicidad

loading