SHOT VOLUME PROGRAMMING
The Espresso Machine features Auto Shot Volumetric Control. It pours just the right amount of
espresso then automatically stops.
1 Shot - Pours 1 Shot Espresso- 1 oz
2 Shot - Pours 2 Shots Espresso- 2 oz
You can adjust the pour volume to suit how you like your espresso.
Preparing for Shot Programming
• Check Water Reservoir
Ensure there is enough water in the Water Reservoir.
• Power
Ensure that:
- The dial is in the OFF position.
- The power plug is inserted into the outlet and turned on.
-The machine is ON and in the ready state.
Important: If a Shot Volume Program isn't started within 1 minute of entering Shot
Programming, the machine will exit back to the Ready state.
1 CUP – shot volume program
- Insert a 1 SHOT filter basket into the group handle. Fill with coffee grinds and tamp.
Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 20-21
Slimline Coffeemaker_BVSTEM7200_22SEPM4 (LA).indd 20-21
ONE CUP
English-20
SHOT VOLUME PROGRAMMING
- Place the portafilter into the group head.
- Hold and press the 1 SHOT button for 3 seconds until the machine beeps.
- Press the 1 SHOT button again.
- Espresso will start to pour and the 1 SHOT button will pulse.
- When you reach your desired single shot volume, press the 1 SHOT button again.
- The new single shot volume has been programmed.
- The programming mode has finished and will return to the ready state.
Note: Single shot volumes can be adjusted between 25mL and 60mL.
• 2 CUP – shot volume program
- Insert a 2 SHOT filter basket into the portafilter. Fill with coffee grinds and tamp.
- Place the portafilter into the group head.
- Hold and press the 2 SHOT button for 3 seconds until the machine beeps.
- Press the 2 SHOT button again.
- Espresso will start to pour and the 2 SHOT button will pulse.
English-21
2022/12/13 9:33 AM
2022/12/13 9:33 AM