Publicidad
1.How to match romote control with touch control panel
a. Unplug the power cord.
b. Press and hold the
c. Keep holding and plug the power cord until the signal
lights off. Now the remote control matched with touch
control panel successfully.
ATTENTION!
1. Lithium battery specification: CR2032.
Attention: according to restrictions on shipping lithium batteries to certain countries and regions,
we will NOT be able to put lithium battery in the remote control for certain contries and regions.
2. DO NOT disassemble romote control. It can cause control failure.
3. DO NOT drop it or expose it to direct sunlight or extreme heat environment. Keep away from liquids.
4. Remove the battery when the remote is not in use for extended periods. This will prevent damage from battery leakage.
5. If remote control doesn't work, please take the battery out. Reload the battery after 30 seconds.
If it cannot work, please replace battery.
9. Remote control manual
Open the back lid
Put the lid back
button until signal light flashes.
2.Height adjustment
Press the
Press the
3.Light adjustment
Press and hold the
light on/off.
25/32
Lighting Effect Key
Height Adjustment
Key
Remote Control
Signal Light
button to raise.
button to lower.
button to switch
Publicidad
