momoDESIGN FGTR EVO Manual Del Usuario página 10

B
D
E
10
To remove the visor, release the side cover
turning it anti-clockwise
A
Pull the fork
Repeat on the other side and remove the visor.
To install the visor, starting from one side of the
helmet, align the coupling holes
pins
C 3
Next, insert the pawl teeth
1
slots
F 4
Turn the side cover
other side of the helmet. Lower the visor and make
sure it is working properly.
N.B. If the visor does not work properly after
C
installation, please contact a Dainese service
point.
The external helmet visor protects
your eyes from impacts with road
2
debris, insects or other small
objects. If you use the helmet
without an external visor, with or
without a sun visor (which does not
offer sufficient protection), your
eyes will not be protected.
C
Before removing the visor in any
case check the laws (Highway Code)
in force in the territory in which
you are located, because it may
be prohibited to ride a motorbike
3
without eye protection.
F
4
.
1
out of the slider pins
B
D
.
into the specific
E
.
clockwise
A 5
5
by
A
.
C 2
with the slider
. Repeat on the