Eu Declaration Of Conformity - LG Energy Solution SLH-G1 Serie Manual De Instrucciones

HIGH VOLTAGE HAZARD. High voltage
exists during the inverter's running.
Disconnect all incoming power and turn off
the product before working on it
Delayed discharge. Wait 5 minutes after
power off until the components are
5min
completely discharged.
Read through the user manual before any
operations.
Potential risks exist. Wear proper PPE
before any operations.
High-temperature hazard. Do not touch
the product under operation to avoid being
burnt.
Do not dispose of the inverter as household
waste. Discard the product in compliance
with local laws and regulations, or send it
back to the manufacturer.
CE marking
RCM marking
Grounding point.
NA
NA
Battery safety:
1. The battery used with the inverter must be approved by
the inverter manufacturer. The approved battery list can be
obtained through the official website.
2. Before installations, read through the corresponding battery's
User Manual to learn about the product and the precautions.
Strictly follow its requirements.
3. If the battery is discharged completely, please charge it
in strict accordance with the corresponding model's User
Manual.
4. The battery current may be influenced by temperature,
humidity, weather condition, etc., which may limit the current
and affect the load capacity.
5. If the battery does not start properly, contact the After-sales
Service as soon as possible. Otherwise, the battery will be
damaged permanently.
6. Measure the DC cable using the multimeter to avoid reverse
polarity connection. Also, the voltage should be under the
permissible range.
7. To avoid damaging the inverter, do not connect one battery to
multiple inverters.
Check Before Power On
No. Check Item
The product is firmly installed at a clean place that is
1
well-ventilated and easy-to-operate.
The PE, DC input, AC output, and communication
2
cables are connected correctly and securely.
3 Cable ties are intact, routed properly and evenly.
4 Unused ports and terminals are sealed.
The voltage and frequency at the connection point
5
meet the inverter grid connection requirements.

EU Declaration of Conformity

LG Energy Solution, Ltd. hereby declares that the inverter with
wireless communication modules sold in the European market
meets the requirements of the following directives:
• Radio Equipment Directive 2014/53/EU (RED)
• Restrictions of Hazardous Substances Directive 2011/65/EU
and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of
Chemicals (EC) No 1907/2006 (REACH)
LG Energy Solution, Ltd. hereby declares that the inverter
without wireless communication modules sold in the European
market meets the requirements of the following directives:
• Electromagnetic compatibility Directive 2014/30/EU (EMC)
• Electrical Apparatus Low Voltage Directive 2014/35/EU
(LVD)
• Restrictions of Hazardous Substances Directive 2011/65/EU
and (EU) 2015/863 (RoHS)
• Waste Electrical and Electronic Equipment 2012/19/EU
• Registration, Evaluation, Authorization and Restriction of
Chemicals (EC) No 1907/2006 (REACH)
3