Publicidad
Idiomas disponibles
Idiomas disponibles
USE & TIPS
Presentation of the user interface
ON/OFF
3. When the appliance is unlocked, press the button for 3 seconds, the appliance switches
off and goes into standby.
4. When the appliance is in standby, press the button again for 3 seconds, and it will start to
operate normally again.
Light
Press the button to switch the LED light inside the appliance on or off.
In standby, this button is deactivated.
To increase the temperature
Press the button once and the LED screen flashes regularly to display the current
temperature setting. Keep pressing the button to adjust the temperature, one press increases
the temperature by 1°C.
If you stop pressing the button for more than 5 seconds, the screen stops flashing and the
new temperature is set. The LED screen displays the new current temperature inside the
appliance.
To decrease the temperature
Press the button once and the LED screen flashes regularly to display the current
temperature setting. Keep pressing the button to adjust the temperature, one press
decreases the temperature by 1°C. If you stop pressing the button for more than 5 seconds,
the screen stops flashing and the new temperature is set. The LED screen displays the new
current temperature inside the appliance.
Publicidad
