Craftsman 358.745270 Manual De Instrucciones página 6

KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT Compare the illustrations with your unit to familiarize yourself with the loca-
tion of the various controls and adjustments. Save this manual for future refer-
ence.
Recessed
Plug
Cord
Retainer
Trigger
Switch
Assist Handle
Air Vents
_, Motor Housing
Semi-automatic
Head with
RECESSED PLUG
The RECESSED PLUG is where you at-
tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze the trigger switch
to operate the unit.
LINE LIMITER
The LINE LIMITER cuts the cutting line
to the proper cutting length.
Tap Button
Line Limiter Blade
ASSIST HANDLE
The ASSIST HANDLE is used to help
hold and guide the unit.
SEMI-AUTOMATIC HEAD
The SEMI-AUTOMATIC HEAD holds De
cutting line and rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance
the cutting line during operation and to
remove the spool during line replace-
ment.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified
on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
25 Ft. (7.5 m) 18 Gauge
50 Ft. (15 m) 16 Gauge
100 Ft. (30 m) 16 Gauge
Extension cords are available for this
unit at Sears.
Extension Cord
(16 Guage) ............ 71-85708
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the
handle and around the hook. insure
the plug and cord are firmly and fully
engaged.
6