Glacier bay BA116-7040 Guía De Uso Y Cuidado

TOOLS REQUIRED
Safety glasses
Measuring tape Flathead screwdriver
Pencil
Installation
1
SELECTING A MOUNTING
LOCATION
□
Position the template (EE) on the
intended mounting surface.
□
Use a level to ensure that the
template (EE) is level on the wall and
then tape the template (EE) to the
wall.
Drill
Level
(3/16 in. or 1/8 in. bit)
Phillips screwdriver
2
INSTALLING THE MOUNTING
BRACKETS
□
If mounting on a tile wall, drill 3/16
in. holes in the marked locations on
the template (EE), and insert the wall
anchors (CC) in the holes.
□
If mounting on a drywall, drill 3/16
in. holes in the previously marked
locations, and tighten the drywall
anchors (BB) in the holes with a
Phillips screwdriver.
□
If mounting on a solid wood surface,
drill 1/8 in. starter holes in the
previously marked locations.
□
Attach the mounting brackets (DD) to
the mounting surface by inserting the
screws (AA) through the mounting
brackets (DD) and into the mounting
surface, or anchors if used.
□
Remove the template (EE).
NOTE:
tightened securely. Do not over tighten
the screws (AA).
Use and Care Guide
HARDWARE INCLUDED
AA - Screw x 4
DD - Mounting bracket x 2
LIMITED LIFETIME WARRANTY
For additional assistance or service call: 1-855-HD-GLACIER
Ensure all screws (AA) are
AA
Item #220 779
Model #BA116-7040
Paper Holder
BB - Drywall anchor x 4
EE - Template x 1
3
ATTACHING THE PAPER HOLDER
□
Place the paper holder over the
mounting brackets (DD), and
ensure the paper holder posts are
properly aligned with the mounting
brackets (DD).
□
Attach the paper holder to the
mounting brackets (DD).
DD
DD
HOMEDEPOT.COM / GLACIERBAY
Please contact 1-855-HD-GLACIER for further assistance.
CC - Wall anchor x 4