UNPACKING INSTRUCTION
CAUTION! Immediately upon receiving the product, carefully unpack the carton, check the contents to ensure that all parts are
present, and have been received in good condition. Notify the shipper immediately and retain packing material for inspection if
any parts appear damage from shipping or the package itself shows signs of mishandling. Save the package and all packing
materials. In the event that the product must be returned to the factory, it is important that the product be returned in the original
factory box and packing.
If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The
arising condensation water might damage your device. Leave the device switched off until it has reached room temperature.
FRONT PANEL
1. SD CARD SLOT: Insert an SD card in this slot.
2. USB PORT: You can play media files from a USB device by connecting the device to this slot.
3. BT LED LIGHT: When BT mode is enabled, this LED will light up.
4. DISPLAY: The display shows multiple forms of information, for example current MODE, elapsed time, etc.
5. INPUT SELECTOR: There are 2 different input positions: line 4 and PHONO.
6. INPUT SELECTOR: There are 2 different input positions: line 2 and USB/BT.
7. GAIN CONTROL: Adjustable preamp of the input level of the corresponding channel.
8. CUE: Allows you to monitor the music through the headphones for the selected channel.
9. MASTER VOLUME: This knob controls the master volume.
10. CHANNEL 1 AND 2 FADERS: Adjust the volume of channel 1 & 2.
11. VU-METER (OUTPUT): The LED display shows the level of the left and right master volume output.
12. MICROPHONE TALKOVER: This function allows you to lower the level of the input channel(s) when talking trough a
microphone.
13. MICROPHONE LEVEL CONTROL: Adjust the volume of the microphone signal.
14. CROSSFADER: Use to fade between channels 1 & 2.
15. HEADPHONES LEVEL CONTROL: Adjust the volume of the headphones signal.
3