Publicidad
Idiomas disponibles
Idiomas disponibles
ES EN
collected. Do not force the nozzle against the waste as this will block the suction tube and reduce the
efficiency of the machine.
Organic materials such as leaves can hold a large amount of water if they have been exposed to wet
conditions, which can cause them to stick to the inside of the suction tube. To reduce sticking, allow the
material to dry for a few days.
WARNING
When unloading shredded leaves, disconnect the plug from the socket and turn the switch to
the off position.
CHECKING FOR DAMAGED PARTS
Before using the machine, check that it is working properly and that it fulfils the function for which it was
designed.
If any parts are broken or missing, contact the authorised service agent.
Any switch that does not work properly must be replaced.
Do not use the machine if the ON/OFF switch does not turn the machine on and off.
7. MAINTENANCE AND CLEANING
WARNING
Before carrying out any inspection or maintenance work, disconnect the mains plug from the
mains.
- Check the machine regularly before starting work. Make sure that all nuts, bolts and screws are tight and
that the guards are correctly fitted.
- Never leave material inside the machine pipe or in the waste collection bag.
- Ensure that the machine is switched off and disconnected from the mains after use.
- Brush loose debris around the fan and inside the suction/blowing tube after each use.
Plug-in blower/vacuum cleaner 3000w
Vacuum mark
Blowing mark
Blower or suction selector lever
MOBICLEAN
18
Publicidad
