Qilive Q.1857 Manual Del Usuario página 7

Remote control
10. Bluetooth pairing/mute button
11. USB source button
12. Volume buttons
13. Next button
14. Play/pause/resume button
4. INSTALLATION
WARNING: Before you make or change any installation, always unplug the soundbar from the wall
socket.
Connect to TV
With the soundbar connected to your TV, you can hear TV audio from the speakers of the soundbar.
1. Using the supplied audio cable, connect the AUX jack (3.5 mm) on the soundbar to the analog
audio output (3.5 mm jack) on your TV.
- Or using audio cables with red and white connectors on one end (not included), connect
AUX jack (3.5 mm) on the
2. Select AUX source by pressing the MODE button on the soundbar (or the AUX button on the
remote control). When AUX source is select, the LED on the front panel of the soundbar turns
green.
Wall mount (Optional)
Two fixed wall brackets are available on the back of the soundbar. You can mount the soundbar on
the wall.
Notes:
- Before wall mounting, make sure the wall can support the weight of the soundbar.
- For wall mounting, the soundbar must be securely attached to the wall in accordance with the
installation instructions. Improper wall mounting may result in accident, injury or damage.
1. Determine the installation height and horizontal direction. Then mark two points on the wall
according to the wall bracket holes on the back of the soundbar.
2. Drill two holes on the wall according to the points marked.
3. Secure suitable dowels (not supplied) and screws (not supplied) in the holes.
4. Hang the soundbar on the fastening screws.
Connect power
1. Connect the supplied power adapter to the DC jack at the back of the soundbar, then to the wall
socket. After power connection, the LED on the front panel of the soundbar lights up red.
5. USE
Turn on and select a source
• Press on the soundbar (or on the remote control). The soundbar turns on. The LED on the front
panel of the soundbar turns from red colour to a particular color based on the source selected.
• Press the MODE button on the soundbar, or press , AUX or
a source. The LED on the soundbar lights up in different colours to indicate different sources
selected.
- When Bluetooth source is selected, the LED turns blue.
- When USB source is selected, the LED turns cyan.
- When LINE IN source is selected, the LED turns green.
Notes for the remote control
- Remove the protective tab from the remote control for first time use.
- When using the remote control, point the remote control at the IR sensor located next to the
LED on the front panel of the soundbar and make sure there is no obstacle between the remote
15. Previous button
16. Sound mode buttons
17. Bluetooth source button
18. On/off button
19. AUX source button
soundbar to the analog audio output (red and white) on your TV.
7 7
on the remote control to select
EN
the