Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
20
4
Press on the release buttons on both sides of the tap unit
(1). The tap unit is released from the keg with a click and
you can remove it (2).
You have to remove the tap unit from the keg before you can
replace the tube.
Always replace the tube when you install a new keg. Never use
a tube for more than 30 days.
5
See chapter 'Preparing for use' for instructions on how to
place the tap unit on the keg and how to place the keg into
the appliance.
Cleaning
Clean the appliance when you replace the keg or when you
store the appliance for a longer period.
Never use scouring pads, scouring agents or aggressive liquids
such as petrol or acetone to clean the appliance.
1
Always unplug the appliance before you clean it.
2
Clean the outside of the appliance with a damp cloth.
3
Always clean the tap unit as described in chapter
'Replacing the keg' to avoid sticky beer residues.
4
Remove and disassemble the drip tray and the drip tray
cover.
5
You can remove the tap handle by pulling it out of the tap
body.
6
Clean the tap unit, the drip tray and the drip tray cover
with hot water and, if necessary, some washing-up liquid.
Hot water may cause burns. Always check if the water is not too
hot before you clean these parts under the tap.
Only the drip tray, the drip tray cover and the spout are
dishwasher-proof.
Recycling
-
This symbol means that this product shall not be disposed
of with normal household waste (2012/19/EU).
-
Follow your country's rules for the separate collection of
electrical and electronic products. Correct disposal helps
prevent negative consequences for the environment and
human health.
Publicidad
