Publicidad
Idiomas disponibles
Idiomas disponibles
5. Setup
5.4 Connecting Devices and Powering the AC Unit
Your charging station contains three baskets, each with a divider to separate the Red Zone from the Blue Zone. Each half basket corresponds with its
storage shelf zone on the front side of the charging station (refer to 4. Zone Labeling for more information). To connect the device power bricks, place
the bricks in the basket. Working one basket and zone at a time, plug the power brick into its designated outlet on the AC charger unit (see
Device/Basket assignments), then run the device cable and connector through a zoned device slot
as needed for each zone and basket/shelf.
Notes: Baskets are removable for easier power brick installation. If using fewer than 36 devices, you can adjust the number of shelf dividers for a particular shelf and
zone. For more information, refer to 5.3 Adjusting Storage Shelf Dividers.
Devices 7-12
Devices 19-24
Devices 31-36
A
Blue Zone
Red Zone
B
and into the overhead cable manager
Devices 1-6
B
Devices 13-18
Devices 25-30
C
7
A
for
C
. Repeat
Publicidad
