Serenco Powerhand SIN-100.2150-R Instrucciones De Uso página 2

UK NL DE FR
Technical Data:
Type LED: 3W COB LED
Type LED spot: 1W SMD LED
Brightness: 100 ~ 300 Lumen
Brightness spot: 80 Lumen
Battery: 3.7 V 1.1 Ah
IP rating: IP54
IK rating: IK07
Charging time: 3 hours
Run time: 3 hours to 6 hours
Run time spot: 3 hours
Working temperature: -20 ~ 50°C
Product dimensions: 300x26.5x20.5 mm
Power connection:
Use the lamp within places prescribed and governed by current regulations on workplaces and electrical systems. Check that the plug
fitted on the cable is suitable for the work environment, if it is not, it must be replaced by a qualified electrician.
Main features:
• COB and SMD LED technology
• COB LEDs provide 100 ~ 300 Lumen
• SMD LEDs provide 80 Lumen
• Magnetic base (42 N)
• 180 forward/backward swivel
• Durable aluminium housing with integrated pocket clip
• Low power consumption, low heat emission
• Charge indicator
• Lamp use is not affected by cold temperatures
• Cordless design improves safety, convenience and flexibility
• 3.7 V 1.1 Ah Li-Polymer battery provides 3 - 6 hours constant light output
• IP54 rated
• IK07 rated
• Robust, shock resistant housing
Instructions for use:
• Charge the battery for at least 8 hours before first use
• To charge the lamp, connect the cable via the USB-C to the lamp directly. Then connect the USB plug to either the 100 ~ 240 V
adapter (optional) or any other USB power source available
• The charge indicator will show 1 blinking green LED when charging
• The charge indicator displays a solid green LED to indicate when charging is complete
• The work light is controlled by 1 button. Push the ON/OFF button (1x) to turn the spot on (80 Lumen), 2x for low setting front LED
(100 Lumen), 3x for high setting front LED (300 Lumen), 4x for the rear LED (200 Lumen) and 5x to turn the unit OFF
• The light will automatically switch off in one press when cycling is left for 5 seconds or more
• Do not leave the battery in a fully discharged condition. Recharge the lamp at least once every 30 days. Always fully charge the
battery to extend the battery lifetime. Always use the original charger
Accessories and spare parts:
1 m USB-C cable
100 ~ 240 V charger optional (SIN-100.1070-2)
Use only accessories and spare parts approved by the manufacturer.
Caution:
• Avoid looking directly into the beam
• Do not use the lamp near open flames
• Switch off the lamp when not in use
• Only use this lamp for the purpose it is designed to, all modifications are strictly prohibited
• Should any cable be damaged, it must be immediately replaced with one of the same type
• When plugging the charger into a suitable mains supply, always check that the device is in good condition, and does not appear
damaged as this may impair safety
Warranty/Service:
• 12 months from the date of the purchase – Proof of purchase is required to make any warranty claim
• The warranty does not apply in case of damage to the device due to negligent / improper use or accidental damage
2
ES
Lumen Laser class I
Protection class III
EAN: SIN-100.2150-B: 8717775513469
SIN-100.2150-R: 8717775513490
Colour temperature: 6500 K
Weight: 80.8 g
Technical data optional charger (SIN-100.1070-2):
Voltage: AC 100 V ~ 240 V
Frequency: 50/60 Hz
Charger output voltage: 5 V 1 A
SMD LED Spot
USB-C
COB LED
200
Lumen
Clip
80 Lumen
100 / 300
Lumen
180°
The lamp can get hot The lamp can get hot
!
≥10 cm ≥10 cm
Keep at least 10 cm distance Keep at least 10 cm distance
from the closest object from the closest object
42 N