\
B
J
Empty
the recoVery
tank
Unplug
extractor
from electrical
outlet.
,/
An automatic
shut-off
device
prevents
the extractor
from
picking
up more
dirty
water
than
it can hold
in
the recovery
tank.
You will know the tank needs to be emptied
--
, When
the motor
sound
rises in pitch.
, You do not see dirty solution coming up through
the recovery tank lid.
, The float (A) inside the recovery tank has risen to
the top of the tank (Fig. 8), and is visible through
the lid window
(B).
¢' Step on handle release pedal (C) to lower handle and
unlock the recovery tank (Fig. 9).
¢'
Lift up on tank
(D) and pull off (Fig. 10).
,/
Lift up on tank lid latches (E) and remove the tank
lid (F), including
the float (G) (Fig. 11). Empty tank.
¢' Place tank onto cleaner. Return handle to upright
position.
¢' Replace lid. Secure both latches (E) (Fig. 11).
FOr full suction, it is important
that the recovery
"N
ank lid is properly
secured before replacing or
)
perating,
j
¢' Remove any debris that has collected on lint filter (H)
on cleaner body (Fig. 12 and inset).