Panasonic EY75A8 Manual De Instrucciones página 19

[For business users in the European Union]
If you wish to discard electrical and electronic equipment, please contact your dealer or
supplier for further information.
[Information on Disposal in other Countries outside the European Union]
These symbols are only valid in the European Union. If you wish to discard these items,
please contact your local authorities or dealer and ask for the correct method of disposal.
IV. MAINTENANCE
• Use only a dry, soft cloth for wiping the unit.
Do not use a damp cloth, thinner, benzine, or other volatile solvents for cleaning.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
V. OPTIONAL ACCESSORIES
• Use only suitable size of bit.
• Panasonic original optional quick
change chuck (EY9HX131E).
Chuck Size: 6.35 mm hex
VI. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model No.
Screw
driving
Bolt fasten-
ing
WARRANTY SUPPLEMENT
• The breakdown and damage caused by usage consistent for a long time (e.g.: factory
work on the assembly line, etc.) is out of warranty.
• In the event that the inside of the tool or battery pack is exposed to water, drain and allow
to dry as soon as possible. Carefully remove any dust or iron filings that collect inside the
tool. If you experience any problems operating the tool, consult with a repair shop.
VII. SPECIFICATIONS
NOTE: Weight indication
Greater than or equal to 1 kg: indicated by 0.05 kg.
Less than 1 kg:
EY9HX131E CAUTION:
Wood screw
Self-drilling screw
Standard bolt
High tensile bolt
indicated by 0.01 kg.
Do not use the unit to drill holes into
wood and metal.
EY75A7
Φ 3.5 mm – Φ 9.5 mm
Φ 3.5 mm – Φ 6 mm
M6 – M16
M6 – M12
- 19 -
EN
EY75A8
—
M10 – M20
M10 – M16