Publicidad
Idiomas disponibles
Idiomas disponibles
Water Filter
Self Check
Energy Saver
Demand Response
Cooling Off
Untitled-7 39
Provides a water filter replacement tutorial and lets you reset
the water filter replacement indicator. Tap to open.
NOTE
• After installing the water filter, tap Water Filter, and then tap
Reset. Tapping Reset re-initializes the function that measures
the time remaining until the water filter needs to be replaced
again.
• If you tap Buy Filter, you will be directed to the website
where you can purchase a water filter.
Self Check is a self diagnoses function. Tap to open. Tap START to
run.
Turns the Energy Saver mode on and off. Tap and drag the
button to turn on or off. By default, the Energy Saver mode is
enabled.
NOTE
If condensation or water drops form on or around the doors, turn
the Energy Saver mode off.
Works with the Smart Grid energy saving manager. Tap to open.
Tap and drag the button to turn on or off. See the Smart Grid
section in this manual for more information.
Cooling Off mode (also called Shop mode), is designed for use
by retailers when they are displaying refrigerators on the shop
floor.
In Cooling Off mode, the refrigerator's fan motor and lights work
normally, but the compressors do not run, and the refrigerator
and freezer do not get cold. If Cooling Off is turned on, all
cooling controls will turn to OFF on the Fridge Manager.
• To activate Cooling Off, tap Activate > Proceed from
Cancel/Proceed.
• To deactivate Cooling Off, tap Deactivate > Proceed from
Cancel/Proceed.
English 39
2018-08-27
4:41:05
Publicidad
