Descargar Imprimir esta página

Ubbink Robotclean Accu XL Pro Manual De Instrucciones Y Lista De Piezas página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 19
1 Robotclean Accu XL Pro Operating Manual and Parts List
Intended use
- The appliance may only be connected for charging to an earthed AC 230 V safety socket (residual current protection device with a rated residual current of no more than 30 mA).
- The power supply for the charging adapter must be at least 3.5 metres away from the pool.
- The pool cleaner may only be used for cleaning private pools. Any other use leads to the immediate loss of the warranty claim.
- The pool cleaner is not suitable for pools with a film thickness below 0.4 mm. Use of the pool cleaner below this film thickness is at your own risk.
- The pool cleaner must not be used when there are people in the pool.
- The sealed drive unit and charging adapter contain no parts that require maintenance. These parts may only be opened by specialists, otherwise the warranty will become void.
- During the cleaning mode, some lubricant may leak from the engine oil seal, which may result in slight water contamination.
- The pool cleaner battery should be charged and discharged every three months if the device is stored for a longer period of time. Otherwise, due to the self-discharge of the battery,
the battery voltage may drop below the level of the over-discharge protection voltage, resulting in damage to the battery.
- The pool cleaner may only be operated with the supplied original charging adapter.
- Charge the pool cleaner battery only under the permitted conditions. The pool cleaner should be placed in a cool and dry place when charging the battery to prevent damage to
internal electrical components due to overheating.
- Operating the pool cleaner outside the water can cause serious damage and will lead to loss of the warranty.
- Do not leave the cleaner in the pool constantly and never expose the pool cleaner and charging adapter to high temperatures (heating, etc.) or weather conditions (rain, etc.).
- If the charging adapter or other parts of the pool cleaner are damaged, they must be replaced to avoid hazards.
- This device may be used by children from the age of 8 years and by persons with reduced physical, sensory or mental abilities, lack of experience and knowledge, provided they
have received supervision or instruction concerning the safe use of the device and understand the risks involved. Children should not play with the device. Cleaning and maintenance
operations that can be performed by the user may only be carried out by children under supervision.
- Keep small parts and packaging materials away from children. Danger of suffocation!
Intended use
The product is intended exclusively for private use and is not suitable for commercial use. The RobotClean Accu XL Pro can be used for almost all commercially available pools with a
horizontal, level bottom. Only use the device as described in this operating manual. Any other use is considered improper and can lead to damage to property and personal injury. Ubbink
Garden BV accepts no liability for damage resulting from improper or incorrect use. Please note that you must screw the transparent protective cap firmly onto the robot
before each use to prevent premature oxidation of the plugs.

DO NOT ENTER THE SWIMMING POOL WHEN THE CLEANER IS IN OPERATION

DO NOT SWITCH THE CLEANER ON WHEN IT IS NOT IN THE WATER
ATTENTION: Before using your cleaner, remove all objects from the pool that could affect the performance of the cleaner.
ATTENTION: Take the cleaner out of the pool after each use. If you leave the cleaner in the pool all the time, this may result in additional service requirements.
Commissioning
On and off switch
Slide the switch to the right: The blue indicator lights up and the cleaner is switched on.
Slide the switch to the left: The red indicator flashes once and the cleaner is switched off.
The indicator lamps
- Blue light is constantly illuminated: The cleaner is switched on
- Blue light is flashing: The cleaner is working
- Yellow light is flashing: The battery is weak / cleaner moves towards the pool wall
- Yellow light is constantly illuminated: The cleaner is at the pool wall and can be lifted out of the water
- Green light is constantly illuminated: Waiting for charging / charging process is finished
- Red light is constantly illuminated: The cleaner is switched off / rechargeable battery is being charged
- Red light is flashing: Fault
1. Make sure that the cleaner is switched off before charging it up.
2. Clean the charging connection before charging up.
3. Place the switched off cleaner at least 3.5 m away from the swimming pool to charge up.
4. Plug the charging cable into the pool cleaner charging connection to charge the battery.
- The red charge indicator lamp shows that the battery is being charged.
- The green indicator lamp lights up when the charging process is finished.
5. After you have made all settings, you can let the cleaner sink into the pool carefully and slowly. Make sure that all air has been allowed to escape from the housing before it sinks to
Manual RobotClean Accu XL 2023_1.indd 2
Manual RobotClean Accu XL 2023_1.indd 2
Charging
Indicator lamp
05.12.23 12:19
05.12.23 12:19

Publicidad

loading

Productos relacionados para Ubbink Robotclean Accu XL Pro