Descargar Imprimir esta página

Flama 646FL Manual De Instrucciones página 18

Freidora sin aceite

Publicidad

Idiomas disponibles

Idiomas disponibles

DESCRIPTION
1. Body
2. Basket
3. Basket handle
4. Removable crisper plate
5. Timer
6. Operating indicator light
7. Temperature selector
8. Operating indicator light
CAUTION
This appliance uses hot air. Do not fill the
fryer drawer with oil, frying fat or any other
liquid.
Do not touch hot surfaces.
This appliance is intended for home use
only.
Do not touch the drawer or basket for some
time after use, as they get very hot.
The drawer will be hot after the cooking
process. Always place it on a heat-resistant
surface when removing it from the
appliance.
16
CLEANING AND MAINTENANCE
Clean the appliance after every use. Unplug
from the power outlet and always wait for
the fryer to cool down before cleaning.
IMPORTANT:
appliance, the power cord or plug in any
type of liquid.
Remove the drawer to allow the fryer to
cool down more quickly.
The drawer and the basket have a non-stick
coating. Do not use metal kitchen utensils
or abrasive cleaning materials to clean
them, as this may damage the non-stick
coating.
Do not use any abrasive material or sharp
utensils to clean the fryer or any of its parts.
Allow all parts and surfaces to dry
completely before using the appliance
again.
Wash the drawer and basket with hot water,
a little dish detergent and a non-abrasive
sponge. You can use a degreasing liquid to
remove any remaining residue.
Tip: If food remains stuck to the basket or
drawer, soak them in hot, soapy water for
about 1 hour. Wash and dry.
Clean the inside of the appliance with
warm water and a non-abrasive sponge.
Fully clean the inside to remove all crumbs
and residue, but do NOT clean the heating
elements in the upper portion.
Clean the outside of the appliance with a
damp cloth and sponge, then wipe with a
soft, dry cloth.
The basket and the drawer can be washed
in the dishwasher.
Never place the basket in the drawer
without the rubber supports, as this could
damage the non-stick coating of the parts.
www.flama.pt
Do
not
submerge
the

Publicidad

loading