Publicidad
Idiomas disponibles
Idiomas disponibles
ො Do not use on a glass surface.
ො This product has been manufactured to be used only inside a building and on a flat
surface.
ො The lamp should be used at the same temperature as the room.
ො Do not touch the lamp when it is in operation. First disconnect and let cool before
doing it (2 hours to 3 hours approximately).
2. HOW TO USE
• The product works using the USB cable included on the box. Insert the USB cable at
the back of the lamp before connecting it to a USB power source or 5V/1A adapter.
Switch on by clicking the on/off button at the back of the product. The USB power
source/energy adapter are not included.
• When switched on, the liquid will spin around inside the ball catching the light giving
• out a spectacular display.
• Do not attempt to alter or modify the lamp or its contents in any way. If any leakage
occurs, do not use and dispose. If the liquid comes into contact with skin or eyes,
rinse repeatedly with clean water. The liquid is non-toxic.
• The LED bulb is not replaceable.
• At the end of the product´s life cycle, please dispose of it responsibly.
• The adapter/power supply used with the electric product shall be regularly exami-
ned for damage to the supply cord, plug, enclosure or other parts, and in the event
of damage, it shall not be used until the damage has been repaired.
• The misuse of the adapter can cause electrical shock.
3. MAINTENANCE & CLEANING
• First disconnect the lamp from the socket and wait for it to cool down.
• To clean, use only a soft damp cloth, never use soap, abrasive cleaning products or
metal scouring pads that could damage the lamp.
Publicidad
