Descargar Imprimir esta página

NewAir AWB-401DB-B Manual Del Propietário página 11

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING & MAINTENANCE
CLEANING YOUR FRIDGE
To clean your fridge:
• Turn off the power, unplug the appliance, and remove all items including shelves.
• Wash the inside surfaces with warm water and baking soda solution. The solution
should be about 2 tablespoons of baking soda to a quart of water.
• Wash the shelves with a mild detergent solution.
• Wring excess water out of the sponge or cloth when cleaning area of the controls, or
any electrical parts.
• Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and
wipe dry with a clean soft cloth.
• Do not use steel wool or steel brush on stainless steel. These will contaminate the
stainless steel with steel particles and rusting may occur.
MOVING YOUR FRIDGE
To move your fridge:
• Remove all items.
• Securely tape down all loose items (shelves) inside your appliance.
• Tape the door shut.
• Be sure the appliance stays secure in the upright position during transportation.
• To avoid denting or scratching protect the appliance with a cover if possible.
CARBON FILTRATION SYSTEM
Your wine is a living object that breathes through the cork of its bottle. In order to
preserve the quality and taste of your fine wines, they must be stored at the ideal
temperature and ambient conditions.
Your cellar is equipped with an active carbon filtration system to ensure air purity and
cooling efficiency, and to maintain an odor-free cabinet for the storage of your wine.
The filter assembly is located at the rear panel inside your fridge.
Keep in mind that this filter must be changed every 12 months.
To replace your filter:
1.
Remove the cans stored on the shelves in front of the filter.
2.
Remove the shelves and set aside to be replaced once you have changed the filter.
3.
Hold the filter and turn it at 90 degrees in a counterclockwise direction and then
pull it out.
4.
Remove the existing filter and replace with a new one.
5.
Put the new filter into the hole and then turn the filter 90 degrees in a clockwise
direction.
www.newair.com
EN
11

Publicidad

loading