AB68-00649D(02)Eng.indd
All manuals and user guides at all-guides.com
Installation
Setting switches
❚
Setting function switches
To set the available functions on your camera, adjust eight switches as shown below:
No
Name
Brief description
1
LL
Line lock ON/OFF
2
LSS
Sens-up or Low speed shutter ON/OFF
3
H-REV
Horizontal reverse ON/OFF
4
V-REV
Vertical reverse ON/OFF
5
BLC
Backlight compensation ON/OFF
6
FL
Flickerless ON/OFF
7
D/N
Automatic switching between color and
black & white ON/OFF
8
AWB
Automatic white balance ON/OFF
9
1. Switch 1 (LL): When this switch is set to
OFF, the camera operates in the internal
DEC
synchronization mode, while when it is
8
set to ON, the camera operates in the
7
line lock mode.
6
5
In the internal synchronization mode, the
4
camera always uses an inside crystal
3
oscillator for synchronization. However
2
if multiple cameras are connected to a
1
sequential switcher, picture rolling or
flickering may occur when switching from
one camera to another. In this case, you
can set this switch to ON to solve this
INC
problem.
The line lock mode allows the camera
to use the phase of the AC power as
the synchronization reference. In this
mode, you can use the phase control
buttons(INC/DEC).
Note
When you are using the DC 12V power, set
this switch to OFF. The line lock feature will
not normally operate even when the switch is
set to ON.
9
2007-05-14
ソタネト 7:42