Genius Dental Hydro Fusion Instrucciones De Uso página 23

b. If necessary, clean with a mild, non-abrasive detergent.
c. Dry the main unit every time you use it/clean it.
3. Removing limescale deposits:
Depending on the hardness of the water
a. Add two tablespoons of vinegar to the water tank with warm water.
b. Point the main unit and the brush head into the water basin.
c. Switch on the appliance and let the tank run empty.
d. Repeat the rinse with a full tank of warm, clean water.
e. You can repeat this process every one to three months.
Troubleshooting
Only for electrical appliances
WARNING!
Switch off the appliance and disconnect the mains plug before addressing any faults! Failure to do so may result in
injury or electric shock.
Problem
Appliance isn't working Battery is empty.
Battery will not charge Appliance or charging station is
Water leakage from the
water hose
Water leakage from the
water tank
Water remaining in the
water tank.
Water pressure low
ATTENTION!
If the fault cannot be rectified, please contact our customer service. Never open up the appliance!
Instruction manual
Possible causes
not correctly connected to a
power socket.
Contact with charging station
has not been established.
Damaged water hose.
Water hose not properly
connected to the main unit.
Leaks.
Hose blocked.
Not enough water in the water
tank.
Wrong water pressure setting
selected.
Solution
Charge the appliance.
Plug the mains adaptor securely into a functioning
power socket
Position the hand-held appliance correctly in the
charging station
Check that the main unit and the charging station are
dry.
Water hose needs to be replaced.
Connect the water hose into the main unit firmly and
check it is properly connected.
Water tank needs to be replaced.
Clean the unit (see "Cleaning and storage").
Fill the water tank.
Adjust the water pressure settings.
GB
23