Lelit PA70N Manual De Instrucciones página 12

PA173
COMPONENTS:
1. Pedal
2. On/off switch
3. Boiler support
4. Handle
5. Legs
6. Working surface cover
7. Motor
USER INSTRUCTIONS:
1. Unfolding: hold the ironing board in a vertical position with the tip downwards; press the handle (4) placed
underneath the board and lift the working surface up by pulling with the foot outwards until the desired
height is reached.
2. Place the ironing machine on the boiler support (3).
3. Insert the electrical plug into an electrical outlet.
4. Place the pedal (1) near the working area.
5. Push the on/off switch (2) on the "I" position.
6. Wait for a few minutes until the working surface is warmed up.
7. Start ironing.
8. Set in action the vacuum function by pushing the pedal (1) both to eliminate the steam from the garment
and to fit the garment on the board easier.
9. Once the ironing is over, we suggest you leave the on/off switch (2) on for a few minutes to ensure that
the inside of the table is dry and free of condensation.
10. Folding: turn the on/off switch (2) off, remove the plug from the outlet. Remove the boiler and the iron
from the boiler support (3), make sure there is no garment on the working surface.
11. As soon as the working surface is cool, press the handle (4) placed under the working surface and at the
same time push the board downwards.
MAINTENANCE:
We suggest checking the ironing board cover (6) periodically and, if it is necessary, replacing it with an original
one (code PA703).
TECHNICAL DATA:
Voltage: 220V – 230V - 50 Hz
Working power: 220 W
Motor power: 20 W
Power of heating element: 200 W
Working surface: cm 123 x 38
Dimensions of the ironing board closed : 155*21*56 cm
Weight : 14 kg
The inserted data and pictures can be subject to changes without previous notice for the improvement of the
machine's performances.
Pag. 12
All manuals and user guides at all-guides.com
English