General Guidelines; Operation Tips - Toolland DGG25 Manual Del Usuario

3. General Guidelines

Refer to the Velleman
this manual.
• Protect this device from shocks and abuse. Avoid brute force when
operating the device.
• All modifications of the device are forbidden for safety reasons.
• Only use the device for its intended purpose. Using the device in an
unauthorised way will void the warranty.
• Handle the power cord by the plug only.
• Do not use the device when damage to housing or cables is noticed.
• Do not attempt to service the device yourself but contact an authorised
dealer.
• Only use glue sticks that are suitable for this device (see features).
Never pull glue sticks back out of the device. Always return the glue
gun to its stand when not in use.

4. Operation tips

• Slide a suitable glue stick into the back of the glue gun.
• Feed a new glue stick before the previous one is finished to ensure
continuous glue flow.
Corded use [1]
• Connect the power cord to the glue gun and plug the other side in the
mains.
• Wait about 3 minutes for the glue gun to reach working temperature
(± 175°). Trying to use the gun quicker might cause damage.
• Pull the trigger to dispense glue from the nozzle. The glue will harden in
about 30 seconds.
• Disconnect the glue gun from the mains when not used for a longer
time.
Cordless use [2]
• Connect the power cord to the base station and plug the other side in
the mains.
• Plug the glue gun into the base station – fold connector down if
necessary – and let it sit for about 3 minutes to reach working
temperature.
• Unplug the glue gun from the base station and use it cordless for about
4 minutes [3] or leave it in the base for precision work.
• Plug the gun back into the base station for at least 3 minutes to bring it
back to working temperature.
• Disconnect the base station from the mains when not used for a longer
time.
V. 02 – 19/08/2020
DGG25
® Service and Quality Warranty on the last pages of
4 ©Velleman nv