Urmet miro 1122 Manual Del Usuario página 26

4.4.2 PROGRAMMING THE FUNCTION FOR INTERCOM CALLS IN THE SAME
APARTMENT (KIT REF. 1722/95 - /96)
To programme the buttons:
• Go to the indoor station to be programmed as caller (indoor station A).
• Press and hold for more than 5 seconds; the red LED will flash slowly and the system will emit 3
confirmation beeps to confirm the new setting.
• Press the button to be programmed as "caller" (
confirmation tone.
• Go to the video door phone indoor station to be called with that button (indoor station B), switch on the
display and press the icon
• T he following screen is displayed:
• Press the icon
successful.
• To exit the programming mode, press and hold for more than 5 seconds on the indoor station A.
In any case, after 10 minutes the device will automatically quit the programming mode, saving
the edited parameters.
With the kit Ref. 1722/96, the call to a video door phone in the second apartment will
necessarily sound all video door phones in the apartment.
4.4.3 PROGRAMMING THE FUNCTION FOR INTERCOM CALLS TO THE
OTHER APARTMENT (KIT REF. 1722/96)
To programme the buttons:
• Go to the indoor station to be programmed as caller (indoor station A).
• Press and hold for more than 5 seconds; the red LED will flash slowly and the system will emit 3
confirmation beeps to confirm the new setting.
• Press the button to be programmed as "caller" (
confirmation tone.
Go to the Master video door phone indoor station of the second apartment (indoor station B), switch
•
on the display and press the icon
26
.
. Indoor stations A and B emit a beep to confirm that programming has been
.
or ) for at least 3 seconds until you hear the
or ) for at least 3 seconds until you hear the
DS1122-013