Publicidad
Idiomas disponibles
Idiomas disponibles
Bar description:
1)
Power supply input ..................... Attach the IEC mains cable here. Built-in fuse.
2)
DMX input ...................................... 3 pin XLR connector for DMX-512 input communication
3)
DMX output ................................... 3 pin XLR connector for DMX-512 output communication
4)
LED display .................................... LED function display and menu buttons to control the
5)
MENU buttons ............................... Menu function buttons x 4 (see below for operation).
6)
Mic .................................................... Built-in microphone for Sound-to-light operation.
7)
Par can mounts ............................ Attach the par can lights to the controller bar at the 4
8)
Par can connections ................... Attach the par can cables to the controller bar at the 4
9)
Light stand socket ....................... Tighten screw to secure the controller bar to the light
Menu description:
Display
Value
d001-d512
001-512
IP.01-IP.64
001-512
A1.01
A1.01-A1.19
A2.01
A2.01-A2.19
A3.01
A3.01-A3.19
A4.01
A4.01-A4.19
A5.01
A5.01-A5.19
r.000-r.255
G.000-G.255
b.000-b.255
u.000-u.255
operating mode of the unit.
points shown.
points shown.
stand.
Function
DMX adress setting
IP mode
Static colour mode A1.01-A1.32 - press the Enter button to save
Jump change colour mode A1.01-A1.32 - press the Enter button to save
Multicolour mode A3.01-A3.32 - press the Enter button to save
Sound activated mode A4.01-A4.32 - press the Enter button to save
Strobe mode A5.01-A5.32 - press the Enter button to save
Adjust the red colour intensity up or down
Adjust the green colour intensity up or down
Adjust the blue colour intensity up or down
Adjust the white colour intensity up or down
Publicidad
