Craftsman 917.377630 Manual Del Operador página 17

TROUBLE SHOOTING
PROBLEM CAUSE CORRECTION
-- w
Loss of drive
(Serf-Propelled
Mowing)
Grass catcher
not filling (If so
equipped)
Hard to push
• Drive wheels not turning
-" with drive control engaged.
• Belt not driving.
• Cutting height too low.
• Lift on blade wom off.
• Catcher not venting air.
• Grass is too high or wheel
height is too low.
• Rear of lawn mower
housing/blade dragging
in grass.
• Grass catcher too full.
• Handle height position not
right for you.
• Adjust or replace drive control
cable, if broken.
• Put belt on pulleys or replace
belts if broken.
• Raise cutting height.
• Replace blade.
• Clean grass catcher•
Raise cutting height.
• Raise rear of lawn mower
housing one (1)
setting higher.
I. Empty grass c_tcher.
• • Adjust handle height to suit.
m
17