cecotec HYDROSTEAM 1030 ACTIVE Manual De Instrucciones página 17

ENGLISH
- 9-accessory kit
- Instruction manual
3. PRODUCT ASSEMBLY
How to install the hose
Fig. 2
1. Insert the hose into the small nozzle and turn it clockwise. Make sure it is securely
fastened.
2. Insert the big nozzle into the hose and turn it clockwise. Make sure it is securely fastened.
How to open the safety valve
Fig. 3
1. Make sure the device is not plugged into a power socket.
2. Release all the steam from inside the water tank by pulling the trigger.
3. Turn the safety valve clockwise. If it is too tight, do not turn it using excessive strength.
Wait for 2 minutes and try again. Otherwise, it may get stuck.
4. The safety valve can then be removed.
5. If you are going to use the steam cleaner, add water. If you are not going to use the
appliance, remove the water from the tank.
4. OPERATION
Fig. 4
1. Remove the safety valve as explained in the previous section.
2. Check that there is no water in the tank (in case you have used the steam cleaner before).
3. Add a glass of water using the measuring cap.
Fig. 5
4. Place the valve again by turning it until it is tight. Do not apply excessive strength, as you
may damage the screw thread.
5. Plug in the device to the closest power socket. When the power light indicator turns red,
it means the appliance is already generating steam.
Fig. 6
6. You can start using the appliance when the light indicator turns green.
7. Press the safety lock. Pull the trigger without using excessive force, keeping your thumb
on the safety lock, as indicated by the arrows in figure 6.
H Y D R O S T E A M 1 0 3 0 AC T I V E
32
5. CLEANING AND MAINTENANCE
- Unplug the appliance from the mains and let it cool down before cleaning it.
- Use a soft, damp cloth to clean the appliance's parts.
- Do not use solvents or any other chemical products for cleaning it.
- Do not immerse the appliance in water or any other liquid. Make sure water does not enter
the appliance.
- Do not use abrasive sponges, powders, or cleaning agents to clean the appliance.
- If something unusual occurs while using the appliance, turn it off. Unplug the appliance
from the power supply and check it thoroughly. Maintenance and repairs are to be carried
out only by qualified personnel.
- Use only parts and components provided provided with the original product by Cecotec.
- Store the appliance and all its accessories in a dry, clean, and safe place, where they are
protected from direct sunlight and where they are not accessible to children or animals. Do
not place the device near heat sources.
6. TECHNICAL SPECIFICATIONS
Product reference: 05515
Product: HydroSteam 1030 Active
Power: 950-1100 W
Rated voltage and frequency: 220-240 V, 50/60 Hz
IPX4
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES
This symbol indicates that, according to the applicable regulations, the
product and/or battery must be disposed of separately from household
waste. When this product reaches the end of its shelf life, you should dispose
of the batteries/accumulators and take them to a collection point designated
by the local authorities.
Consumers must contact their local authorities or retailer for information
concerning the correct disposal of old appliances and/or their batteries.
Compliance with the above guidelines will help protecting the environment.
ENGLISH
H Y D R O S T E A M 1 0 3 0 AC T I V E
33