cecotec TV LED A3 ALH30032 Serie Manual De Instrucciones página 114

ENGLISH
- Automatic service update: Select On or Off.
Antenna adjustment
- Use to select the ANTENNA, then press OK to enter.
Fig. 22
- Automatic tuning: Press OK to start the automatic search process. The search may take
a few minutes.
- Press and select YES to exit the search.
- Manual Tuning: Use
then select Start Scan to scan the channel.
- LCN: Select On or Off.
- Automatic update of the automatic service: Select On or Off.
Satellite adjustment
- Use to select the SATELLITE, then press OK to enter.
Fig. 23
- Satellite tuning: select satellite and search for channel.
- Automatic service update: select on or off.
- LCN: Select On or Off.
Fig. 24
- Press Scan to enter the channel scan settings and select the desired item.
Fig. 25
- Network: Use the network ID to search for channels.
- Default: Use the default transponder to search the channels.
- Blind scan: Search of all frequencies.
4. REMOTE CONTROL
Fig. 26
Make sure that there are no obstacles between the remote control and the infrared sensor and
that sunlight or other light sources are not reflected on them.
Pair the bluetooth* remote control with the TV
- The Bluetooth* remote control, which is mainly used to control the TV using the Google
voice assistant, needs to be paired with the TV at first power on or later by following the
steps below:
1. Press to go to the home page.
2. Press to access "RC Pairing".
3. Follow the "setup tips page", press OK and
114
TV LED A3 SERIES ALH30032 / ALH30032S
to select and set the Channel Number and Frequency (KHz),
at the same time.