Cascade Installation - Alcad DMH-141 Manual De Usuario

NO HOT PLUG!
1. Mount and tighten the screws
and plugs to secure the unit to
the wall. Left 10 cm of free space
around from each unit.
2. Connect cables to audio/video
source. The signal source can be
from a surveillance
monitor,
set-top box, CCTV and etc.
3. Optionally,
loop-through RF input coaxial
cable.
4. Connect cable to RF output to
STB/TV.
5. Power supply connection: a)
Connect the earth cable; b)
Connect the power plug to the
unit mains connector; c) Connect the power plug to the mains socket.

Cascade installation

DMH-141 unit has 1 AV analogue TV signal to RF output encoded as DVB-T Digital TV
signal.
Several DMH-141 units can be cascaded in order to increase the capacity. The maximum
capacity of a series of N units is 1xN incorporated TV signals. To cascade 2 or more units,
connect the RF output of the preceding unit to the TV input (loop-through) of the next unit
(see below illustration).
DVD,
connect the
1
3
4
2
5
26