Publicidad
Idiomas disponibles
Idiomas disponibles
MOUNTING & USE
UNFOLDING :
Place the rollator on its wheels and press down on the two side posts of the seat until they click into place (see 1 and 2 below).
BAG INSTALLATION :
the bag is attached to the ends of the frame with velcro.
HANDLE HEIGHT ADJUSTMENT :
Insert the handles at least up to the first through hole in the frame tube. Push the fixing screw through from the inside and
tighten it with the washer and the knob. To change the handle height adjustment, loosen the fixing screw by turning the knob
counter-clockwise. Then lock the handle at the desired height as described above. (See 3 and 4 below).
CANE HOLDER INSTALLATION :
Under the backrest and on the handle posts, insert the cane holder by inserting the lugs into the holes, close the clip, press
firmly until it clicks into place. Insert the cup with its stem at the bottom into the hole provided and clip it in place. Check that it
fits properly. The cane holder can be mounted on the right or left.
DMI-F-10_Annexe 2_Notice.9
Mai 2023
1 : Handle (x2)
2 : Handle tubing (x2)
3 : Brake handle (x2)
4 : Knob (x2)
5 : Seat (x1)
6 : Rear wheel (x2)
7 : Front wheel (x2)
8 : Cane holder (x1)
9 : Bag (x1)
10 : Backrest (x1)
11 : Brake cable (x2)
12 : Reflective sticker (x2)
Page 7 sur 15
Publicidad
