Anker 554 Manual Del Usuario página 6

Item
Magnetic Remote
1
Selector
Rear View
2
DC-IN Port
3
PC 1 Port
4
PC 2 Port
5
DisplayPort
6
HDMI Port
Side View
7
Audio In / Out
Front View
USB-C 3.2 Gen 1
8
Port
USB-A 3.2 Gen 1
9
Port ×2
10
USB-A 2.0 Port
11
Power Button
Description
Press the remote selector to switch between two connected
computers.
• The blue LED indicates the current selection is PC 1.
• The yellow LED indicates the current selection is PC 2.
Plug one end of the included 180W power adapter into the DC-IN
port and the other into a power outlet.
Connect your first PC to the PC 1 port via the included USB-C
cable.
Note: When two PCs are connected, the power supply is limited to
65W. When one PC is connected, the power supply can deliver up
to 100W.
Connect your second PC to the PC 2 port via the included USB-C
cable.
Note: When two PCs are connected, the power supply is limited to
65W. When one PC is connected, the power supply can deliver up
to 100W.
Up to 4K@60Hz output to a single display.
Up to 4K@60Hz output to a single display.
Connect to earphones or other devices with a 3.5 mm AUX
connector.
Up to 5 Gbps data transfer.
Power output up to 20W.
Up to 5 Gbps data transfer.
Each port can output up to 7.5W.
Data transfer speeds up to 480 Mbps and can be used to connect
USB devices such as keyboards, mice, or printers.
Turn the power supply on or off.
EN 02